We manufacture super high quality light curtains,safety light curtains,elevator light curtain sensor,banner light curtain, banner safety light curtain,china elevator door detector, lift door detector, elevator infrared detector, elevator infrared sensor, infrared eyes sensor, edge sensors, safety sensor, sensor edge, photoelectric products. We offer CE certificate with 100% high quality and extremely competitive pricing. The warranty period for the goods is 18 months from the exworks delivery.
           Factory Ningbo Beilun Elevator Technology Co., Ltd.


 
 
Before using MXB G infrared elevator door detector (elevator light curtain)for elevator, please read this specification carefully and keep this specification for the future installation.

Please check if anything is missing from the following packing list:

 

ITEM

QUANTITY

1

POWER SUPPLY CONTROL UNIT

1PCS

2

DURABLE FLEXIBLE CABLE

2PCS

3

TRANSMITTER

1PCS

4

RECEIVER

1PCS

5

USER MANUAL

1COPY

6

MOUNTING ACCESSORIES

1SET



Technical Date:

Number of beams(Max.)

128

Response time(MS)

65

Range of detection

0-3000mm

Active protection height

20-1841mm

Vertical mounting tolerance

+/- 20mm/10°

Horizontal mounting tolerance

+/- 5mm/7°

Light immunity(LUX.)

100000

Operating temperature

-20——+65

LED indicators

Green:power supply; Red:signal indicators

Housing material

Aluminum alloy,finished black

Housing dimension(L)

2000mm

Housing dimension(W)

50mm

Housing dimension(D)

25.5mm

Power consume

3w

System marking

CE

 

Installation sketch for MXB G


System Connection

The system has been designed to connect to the door operator or lift controller directly. When the infra-red beams are obstructed, a system trigger occurs and switches a relay or transistor output. This is used by the door/lift controller to re-open the doors . The standard output is relay contact 1 opend 1 cloesd.

Power supply unit- AC220V
The model PWSMXB-220 power supply is used if an AC220V50/60HZ supply ovltage is available. It provides a regulated DC supply for the detector and a relay output for connection to the door re-open circuit.

Power supply unit- AC110V
The model PWSMXB-110 power supply is used if an AC110V50/60HZ supply ovltage is available. It provides a regulated DC supply for the detector and a relay output for connection to the door re-open circuit.

Power supply unit- DC24V
The model PWSMXB-24 power supply should be used only if an unregulated DC supply voltage (15V-30V) is available .It provides a regulated DC supply for the detectors and a relay output for onnection to the door re-open circuit.

Connection diagram for type PWSMXB-220 and PWSMXB-110

Elevator Door Detector (Elevator Light Curtain) Power Unit
Please make sure that all the wires are connected according the following diagram



Connection diagram for the type PWSMXB-24

Elevator Door Detector (Elevator Light Curtain) Power Unit
Please make sure that all the wires are connected according the following diagram

LED indication in power supply for all type

Power indication Green

Status indication
Red

Buzzer
(if existing)

Mode

ON

OFF

OFF

Normal

ON

ON

OFF

Interruption

ON

Flsshing

OFF

Self-check

LED indication and buzzer in receiver for all type

Power indication Yellow or Green

Status indication
Red

Buzzer

Mode

ON

OFF

OFF

Normal

ON

ON

OFF

Interruption

ON

ON

ON

Interruption≥10s

ON

Fast flashing

OFF

Timeout

ON

Flashing 1times/2s

OFF

Low power consumption

WECOMXB U; WECOMXB W; WECOMXB SIX; WECOMXB S65; WECOMXB SUN; WECOMXB 3D
WECOMXB J
Copyright © Ningbo Beilun Elevator Technology Co., Ltd, All Rights Reserved. Design By Wecochina.com
Add: 36 Jinggangshan Rd., Beilun, Ningbo China.
Website: www.wecochina.com
Tel: 86-574-81325581,   Fax:86-574-82363344   Email: sales@wecochina.com