This light curtain is a special slim model,only 6.6mm thickness
Before using MXB SIX infrared elevator door detector for elevator(safety light curtain, the slim model), please read this specification carefully and keep this specification for the future installation.

Please check if anything is missing from the following packing list:

Sensor / Beams(Max.) 94 Effective distance 0-3000MM Working Environment -20℃—+65℃,10,000LUX Vertical mounting tolerance +/- 10mm/10° Horizontal mounting tolerance +/- 5mm/7° Dimensions 200MM*30MM*6.6MM Detecting Height 20-1841MM Response Time 65MS Power consume 3W Signal output Relay contact(1NO/1NC) The green LED in receiver Power indicator The red LED in receiver unit Beams obstructed or system fault Seasoned with door-knife Normal Seasoned with door-knife Within 3s after power on(automatically) Sleeping mode 15S after door closed completely

Installation sketch for light curtain MXB Q

1、Securely fix the transmitter and receiver to the car/car doors through the fixing holes.Ensure both the receiver and transmitter are at the same level.
2、 Fix the power box on the car top, ensure the steel cover is grounded.
3、Connect cable from receiver and transmitter to power box, ensure all cable bends are easy, separate the cable run from other high voltage wires. Ensure cables are secure both sides of the intermediate connectors .

Buzzer functions setting for AC power unit